Ford Opens Technical Support Center In Concord, North Carolina
05/14/2014
“Performance is a critical and growing business for Ford,” said Jim Farley, Ford Executive Vice President, Global Marketing, Sales and Service and Lincoln. “We recognize our customers want vehicles that offer great fuel economy, leading technology and a great driving experience. Our new technical center is another tool that will help us continue to grow our performance vehicle business around the world.”
Expected to be fully operational later this summer, the facility will serve as a center for Ford Racing technical support and for teams to develop and test their cars for competition. The location was selected because of its proximity to the NASCAR research and development center and a majority of race car team headquarters, the automaker said.
The centerpiece of the building is a full-motion platform simulator that will allow Ford Racing teams to optimize their setups for individual track configurations, and for drivers to practice driving a track ahead of an upcoming race weekend. Similar technology has been used in Formula One. After the simulator has been proven through racing, Ford will apply that knowledge to further improve vehicle dynamics on its high-performance street vehicles.
“Motorsports and product development at Ford are interlinked, and this new center will house advanced tools that will serve both our race teams and the development of future Ford performance vehicles,” said Raj Nair, Group Vice President, Ford Global Product Development.
“We have enhanced our vehicle dynamics simulation tools to lead the development of Ford Racing cars in NASCAR and IMSA, as well as our street products,” said Nair. "The driving simulator will help us to push handling optimization to the next level so that our cars can be fast right off the trailer, allowing our teams to focus on fine-tuning changes when they get to the track.
“The simulator can also be used to make continual adjustments to advance the car setup for the race weekend based on what the teams see in early practice sessions,” added Nair. In addition, the simulator will help hone communication between driver, crew chief and engineer, while also refining predictability and accuracy of simulation software.
Beyond its direct and immediate effect on Ford Racing, the company said its new technical center with its advanced simulation and measurement tools is just the latest investment by Ford in its pursuit to offer a profitable lineup of performance vehicles. The new infrastructure will allow swifter and smarter leverage of the latest in product development technology.
Initially, the facility will focus on supporting NASCAR teams in all three major touring divisions, but will eventually expand to include other Ford Racing teams participating in other series.
“This facility is an investment in advanced Ford Racing technical tools that will support our goal of winning races and championships,” said Jamie Allison, director, Ford Racing. “It also provides us with expansion capabilities as we support our broader array of Ford teams from NASCAR, the TUDOR United SportsCar Championship, IMSA, Rally and Global RallyCross, NHRA and other series.”
The support facility will also serve as a parts distribution warehouse. The various pieces of test equipment include:
Kinematics machine: This machine can test and measure suspension kinematics – camber, toe, scrub and various loads with tires and springs. Race teams use this weekly to set up their front suspensions for different track configurations.
Chassis torsional twist rig: Used to quantify the chassis structurally in the torsional mode – the key parameter for a chassis. It can be used to determine the entire torsional stiffness of the car, the stiffness of the chassis independently, or the influence of various components on the car.
Vehicle center of gravity machine: This is used to precisely measure the center of gravity height of a completed car. It can be used to quantify improvements over time. Race teams generally use the machine once a quarter to gauge progress and test their latest theories.
Coordinate measurement machine: This machine enables teams to measure their components for quality control and to build simulation models, which allows them to make sure their cars comply with regulations.
Project Announcements
Daisy Brand Plans Boone, Iowa, Production Operations
04/22/2024
Canfor Expands Fulton, Alabama, Production Operations
04/22/2024
Tucker Door & Trim Plans Henrico County, Virginia, Operations
04/19/2024
Zekelman Industries Expands Blytheville, Arkansas, Operations
04/19/2024
Fibrebond Corporation Expands Webster Parish, Louisiana, Operations
04/19/2024
Master Steel Expands Hardeeville, South Carolina, Operations
04/19/2024
Most Read
-
2023's Leading Metro Locations: Hotspots of Economic Growth
Q4 2023
-
2023 Top States for Doing Business Meet the Needs of Site Selectors
Q3 2023
-
38th Annual Corporate Survey: Are Unrealized Predictions of an Economic Slump Leading Small to Mid-Size Companies to Put Off Expansion Plans?
Q1 2024
-
Making Hybrid More Human in 2024
Q1 2024
-
Manufacturing Momentum Is Building
Q1 2024
-
20th Annual Consultants Survey: Clients Prioritize Access to Skilled Labor, Responsive State & Local Government
Q1 2024
-
Public-Private Partnerships Incentivize Industrial Development
Q1 2024