EPA Sets Greenhouse Gas Emission Limits
05/14/2010
The phased-in approach will address facilities like power plants and oil refineries that are responsible for 70 percent of the greenhouse gases from stationary sources that threaten American's health and welfare.
"After extensive study, debate and hundreds of thousands of public comments, EPA has set common-sense thresholds for greenhouse gases that will spark clean technology innovation and protect small businesses and farms," said EPA Administrator Lisa P. Jackson in a press statement. "There is no denying our responsibility to protect the planet for our children and grandchildren. It's long past time we unleashed our American ingenuity and started building the efficient, prosperous clean energy economy of the future."
EPA's phased-in approach will start in January 2011, when Clean Air Act permitting requirements for GHGs will kick in for large facilities that are already obtaining Clean Air Act permits for other pollutants. Those facilities will be required to include GHGs in their permit if they increase these emissions by at least 75,000 tons per year (tpy).
In July 2011, Clean Air Act permitting requirements will expand to cover all new facilities with GHG emissions of at least 100,000 tpy and modifications at existing facilities that would increase GHG emissions by at least 75,000 tpy. These permits must demonstrate the use of best available control technologies to minimize GHG emission increases when facilities are constructed or significantly modified.
Under the new emissions thresholds that begin in July 2011, EPA estimates approximately 900 additional permitting actions covering new sources and modifications to existing sources would be subject to review each year. In addition, 550 sources will need to obtain operating permits for the first time because of their GHG emissions.
Project Announcements
Autokiniton Expands Bellevue, Ohio, Manufacturing Operations
03/24/2026
Philip Morris International Plans Tampa, Florida, Operations
03/24/2026
TerraPower Isotopes Plans Philadelphia, Pennsylvania, Manufacturing Operations
03/24/2026
#TagSwag Expands Louisville, Kentucky, Production-Fulfillment Operations
03/23/2026
Forge Construction Relocates-Expands Kansas City, Missouri, Headquarters Operations
03/23/2026
Henkel Plans Trumbull, Connecticut, Research-Development Operations
03/23/2026
Most Read
-
Top States for Doing Business in 2024: A Continued Legacy of Excellence
Q3 2024
-
Economic Developer Role Shifting from Deal-Making to Systems Stewardship
Q1 2026
-
What Companies Need from Modern Manufacturing Sites
Q1 2026
-
Capitalizing on the OBBBA Before the 2026 Cliff
Q1 2026
-
Amazon’s First Mass Timber Delivery Station Tests the Future of Low-Carbon Logistics
Q4 2025
-
Last Word: Don’t Lose by Winning
Q1 2026
-
Advanced Manufacturing Isn’t a Buzzword—It’s a Different Location Strategy
Q1 2026