Automotive Site Guide: Defining Labor for the Auto Industry
Automotive Site Guide 2006
But just what does "sufficient labor pool" mean? When a company or a site location consultant is evaluating labor within a geographic region, there are many subfactors that are identified and considered, typically in a very logical sequence, that will either qualify or eliminate geographic regions within the search area. The following provides an insight into some of the major subfactors and how they are evaluated as a part of a site location study.
Work Force Density
The first subfactor that is most common relates to population and work force density. As a general rule of thumb, the work force density should be at least 100 times greater than the number of employees projected for the new automotive assembly plant; and in some regions, it may even be defined by a higher ratio of up to 150 times greater than the number of employees. The projected number of employees is established based on a full buildout at the new location, not just the number of employees normally announced for the initial phase of production. All automotive assembly plants are designed and are planned for future expansions, and all project criteria are based on full buildout for future years. By way of example, if a plant is going to hire 2,000 employees for the initial phase and will add an additional 2,000 employees as part of a future expansion for a total of 4,000 employees, then the work force density within a commuting distance of the plant should be at least 400,000. In the latter case, the work force density would need to be at least 600,000. Note that this is work force density, not population density.
One of the variables in determining whether a region is qualified based on work force density relates to the definition of "commuting distance." The most commonly used criterion for defining commuting distance for large manufacturing facilities is to use a "90-minute drive-time" radius, although it is not uncommon for some mega-projects to use larger radii. Using "drive time" is preferred over "distance" due the potential impact of highway quality, traffic congestion, traffic patterns, and traffic corridors. Most companies will prefer locations where future employees (and suppliers) will have more than one highway route to get to the plant. This strategy minimizes the risk and the impact of a natural or man-made disaster that may block the primary highway route. Most companies will also take into consideration the impact that weather patterns in the region - in the form of ice, snow, heavy rains, high winds, and violent storms - may have on traffic movement. Any or all of these could have significant impact on driving time in many geographical regions.
However, point of fact is that many individuals will drive significant distances, or will make arrangements for short-term living accommodations, for the opportunity to work in an automotive assembly plant. It has been previously reported by Toyota in Georgetown, Kentucky, that its employees had a home of record in all but two counties within the state, and a similar condition has been reported by Nissan in Canton, Mississippi, where they have employees representing all but two counties within that state. This condition supports evaluating work force density over a broader area than normal for these types of operations.
Literacy and Graduation Rates
After a region has qualified in terms of work force density, the labor analysis is expanded to take into consideration multiple, additional subfactors for screening and evaluation purposes. Two of the more important subfactors include community literacy rates and percentage of high-school and college graduates within the work force draw area. Literacy rates are highly important relative to potential employees being able to read, write, and interpret written directions, procedures, and other actions required as a part of the job. Percentage of high-school and college graduates is important in terms of the potential availability and trainability of an existing and educated work force. The higher the percentage of graduates at either level, the more likely the company will be able to recruit a trainable work force. Most companies will prefer regions that equal or exceed national averages for literacy and graduation rates.
Concurrently with the above, standardized test scores for high-school students are also reviewed. Some states and regions use the Scholastic Assessment Test (SAT) as their standardized test while others may use the American College Test (ACT) as a measure. Both are good indicators of the preparedness of high-school students to enter post-secondary education, and both are also good indicators of the probability of success of students after entering post-secondary education. From a prospective employer's view, both tests are also good indicators of the quality of education at the secondary-school level. However, one should be very careful in interpreting average scores posted by states and regions.
It is important to note and understand the administrative policy and implementation strategy that a specific region uses in compiling and posting test score results. Some states and school districts require all students enrolled in public schools at a particular grade level to take the test, whereas other states and school districts require only college-bound students to take the test. College-bound students typically represent the top 10 to 20 percent of students in a graduating class; hence, those states or districts that test all students and post a composite score of their results may appear to have lower performance scores than districts that test only college-bound students. It is always best for consultants and companies to request average standardized test scores for the top 10 to 20 percent of students in each area being evaluated to ensure a fair comparison between alternative locations. And it is a good idea for states and communities to have these comparatives available in advance of any request.
Trainability vs. Skill Requirements
One of the most misunderstood requirements related to labor and labor qualifications for an automotive assembly plant relates to the skill requirements needed for the work force. The work force profile for a typical assembly plant will be broken down among assembly workers, maintenance and technician workers, and management and supervision. Generally, about 70 percent of the work force will be assembly workers; about 20 percent will be engineers, technicians and maintenance workers; and about 10 percent will be management, supervision, and administration. For a 2,000-person work force, this would break down into 1,400 assembly workers; 400 technical and maintenance workers; and 200 management, supervision, and administrative employees.
In recruiting assembly workers, most automotive companies would prefer to recruit individuals with no previous automotive experience. While this may seem unusual, it makes perfect sense in establishing a new and positive work climate within the plant in terms of motivation, dedication, coordination, communications, and productivity. The types of skills and knowledge base that companies are seeking relate more to written and verbal communication skills, interpersonal skills, rationalization, flexibility, dexterity, and attitude versus any specific set of manual skills. Companies are looking for individuals who can be easily trained in motor skills, but more importantly, those who can work in an environment using positive attitudes, creative thinking, good judgment, and teamwork. Previous work experience is required, but typically from the perspective of attendance, reliability, safety, performance, and references.
The recruitment of engineers, technicians, and maintenance mechanics takes on a totally different approach. These positions typically require extensive formal classroom and laboratory training for basic knowledge and technical skills in selected fields, and then require intensive training for specific types of equipment and manufacturing processes. Much of the equipment and process-specific training is done through vendor, one-on-one, or on-the-job training. Companies will recruit individuals for these positions based on the knowledge, experience, and skill sets they bring to the job, but they do not typically require experience in automotive assembly plants. Most companies are seeking a combination of technical knowledge, technical experience, and interpersonal skills. It is assumed these candidates can be trained in equipment and manufacturing processes specific to the plant.
The strategy for recruiting management, supervisory, and administrative personnel varies among different companies. Most companies, however, will want many of these individuals to have previous automotive experience and, more specifically, automotive experience working for the same company in one of their other locations. Senior management and human resources personnel are most critical in the hiring and training of a new work force, and are normally transferred to the new location from an existing operation. These individuals become the catalyst in creating a positive work environment and in establishing the work ethic and attitude of the plant. Management and supervision selected from outside the company are screened and evaluated very carefully for communication skills, interpersonal skills, work ethic, and previous work history.
These expectations, hiring strategies, and skill development requirements are taken into consideration when evaluating the labor pool for a region. It is easier to understand why "automotive experience" or "assembly worker experience" is not typically a criterion in evaluating labor qualifications within a region when one understands the above-discussed recruitment and training strategies. Trainability is much more critical.
2023's Leading Metro Locations: Hotspots of Economic Growth
The Logistics Analysis That Drives Industrial Site Selection
2023 Top States for Doing Business Meet the Needs of Site Selectors
Technology’s Influence on Workforce Development
Workforce Q4 2023
AI 101 for Site Selection
First Person: Realizing the Inflation Reduction Act’s Full Potential
2023 Top States Commentary: Top-Ranked States Have What It Takes to Win Mega Projects